Ohmic Touch Relay Circuit Errors

Hi Guys,
I have ohmic touch working so this is more for the next guy to look at it. The relay circuit at linuxcnc.org/docs/devel/html/plasma/plas...r.html#ohmic-sensing has errors in the relay terminal labelling. The terminal numbers on the optically isolated relays have been swapped between input and output. The image has the opto LED labelled as pins 13 & 14 when they should be A1 & A2 (and vice versa).

Yeah I drew that drawing and I did pick up on that when I went to wire it up, Ill fix it up and see if Rod can update the drawing.

Cheers.

thefabricator03 wrote: Yeah I drew that drawing and I did pick up on that when I went to wire it up, Ill fix it up and see if Rod can update the drawing.

Perhaps you can ask Phill nicely about that.