plasmac spotting broken

More
5 years 11 months ago #188069 by rodw
Replied by rodw on topic plasmac spotting broken

snowgoer540 wrote: I’ll guess no news is good news, and that was the problem..... ¯\_(ツ)_/¯


Nah, I had to go to work to test it so it was a week day job. Yes some poor people in the world are at work while you rest on a Sunday!

Please Log in to join the conversation.

More
5 years 11 months ago #188070 by rodw
Replied by rodw on topic plasmac spotting broken
hmm, I found that line in my plasmac-connections.hal file and it has comments around it so it must be included and set to 0 by default these days.

Please Log in to join the conversation.

More
5 years 11 months ago #188072 by tommylight
Replied by tommylight on topic plasmac spotting broken

rodw wrote: Yes some poor people in the world are at work while you rest on a Sunday!

So that makes me poor ! :)

Please Log in to join the conversation.

More
5 years 11 months ago #188075 by snowgoer540
Replied by snowgoer540 on topic plasmac spotting broken

tommylight wrote:

rodw wrote: Yes some poor people in the world are at work while you rest on a Sunday!

So that makes me poor ! :)


Did some work for my side business this morning, but not my “real” job... before my honey do list of course. I’m not sure if that makes me poor as well?! :laugh:

Please Log in to join the conversation.

More
5 years 11 months ago #188076 by phillc54
Replied by phillc54 on topic plasmac spotting broken

rodw wrote: hmm, I found that line in my plasmac-connections.hal file and it has comments around it so it must be included and set to 0 by default these days.

It was always defaulted to zero because of the multi spindle implementation but now that has been changed I think the default can be 1. Actually it can probably doesn't need to be a choice now and the pin could be ignored.

Please Log in to join the conversation.

More
5 years 11 months ago #188077 by rodw
Replied by rodw on topic plasmac spotting broken

snowgoer540 wrote:

tommylight wrote:

rodw wrote: Yes some poor people in the world are at work while you rest on a Sunday!

So that makes me poor ! :)


Did some work for my side business this morning, but not my “real” job... before my honey do list of course. I’m not sure if that makes me poor as well?! :laugh:


What a poor married man ? :blink:

Be careful with side businesses. I had one once, now I've been in a warehouse for the last two years and actually have to go to work! 11 years later and still growing strong! You just need one idea and eventually it takes over your life!

Please Log in to join the conversation.

More
5 years 11 months ago #188079 by snowgoer540
Replied by snowgoer540 on topic plasmac spotting broken

rodw wrote:

snowgoer540 wrote:

tommylight wrote:

rodw wrote: Yes some poor people in the world are at work while you rest on a Sunday!

So that makes me poor ! :)


Did some work for my side business this morning, but not my “real” job... before my honey do list of course. I’m not sure if that makes me poor as well?! :laugh:


What a poor married man ? :blink:

Be careful with side businesses. I had one once, now I've been in a warehouse for the last two years and actually have to go to work! 11 years later and still growing strong! You just need one idea and eventually it takes over your life!


Not married... yet. But she lives here so it's basically the same thing :laugh:

Sounds like a good problem to have... Honeslty that would be great, but I can see the complications with it as well. For one thing, I really like the people I work with at my "real" job. I suppose if I got big enough, I could just hire some of them though :)

Please Log in to join the conversation.

Time to create page: 0.067 seconds
Powered by Kunena Forum