Code:
colten@tormachpcnc:~/linuxcnc/configs$ linuxcnc qtplasmac/qtplasmac.ini
LINUXCNC - 2.8.1
Machine configuration directory is '/home/colten/linuxcnc/configs/qtplasmac'
Machine configuration file is 'qtplasmac.ini'
Starting LinuxCNC...
emc/iotask/ioControl.cc 702: can't load tool table.
twopass:invoked with <> options
twopass:found ./qtplasmac.hal
twopass:CANNOT FIND FILE FOR:plasmac.tcl
Shutting down and cleaning up LinuxCNC...
Note: Using POSIX realtime
LinuxCNC terminated with an error. You can find more information in the log:
/home/colten/linuxcnc_debug.txt
and
/home/colten/linuxcnc_print.txt
as well as in the output of the shell command 'dmesg' and in the terminal
I just ran qtplasma-setup using the plasma directory which is a working machine with NO plasmac/plasma config. I used it to create my plasmac setup. This is a RIP install. I'm using ~/git/linuxcnc/scipts/rip-environment to run as I have a working pathpilot installed as well to run my mill
Code:
colten@tormachpcnc:~/linuxcnc/configs/qtplasmac$ ls
backups qtplasmac qtplasmac.hal qtplasmac_material.cfg
postgui.tcl qtplasmac_connections.hal qtplasmac.ini qtplasmac.prefs
colten@tormachpcnc:~/linuxcnc/configs/qtplasmac$ grep plasma.tcl *
grep: backups: Is a directory
grep: qtplasmac: No such file or directory
colten@tormachpcnc:~/linuxcnc/configs/qtplasmac$ grep plasmac.tcl *
grep: backups: Is a directory
grep: qtplasmac: No such file or directory
qtplasmac.ini:HALFILE = plasmac.tcl
colten@tormachpcnc:~/linuxcnc/configs/qtplasmac$ cd ../plasma
colten@tormachpcnc:~/linuxcnc/configs/plasma$ grep plasmac.tcl *
grep: backups: Is a directory
colten@tormachpcnc:~/linuxcnc/configs/plasma$
Code:
colten@tormachpcnc:~/git/linuxcnc$ git status
On branch 2.8
Your branch is up to date with 'origin/2.8'.
i also get this error when I remove the offending line from the ini
Code:
twopass:found ./qtplasmac_connections.hal
twopass: Error in file ./qtplasmac.hal:
can't read "::HMOT(CARD0)": no such variable
