QtPlasmaC release.

Franklin
Offline
Senior Member

2 years 8 months ago #293806 by Franklin

Replied by Franklin on topic QtPlasmaC release.

Thank you for your work, I really enjoy using QtPlasmaC

Please Log in to join the conversation.

phillc54
Topic Author
Offline
Platinum Member

2 years 8 months ago #293952 by phillc54

Replied by phillc54 on topic QtPlasmaC release.

Franklin wrote:
Hello, I noticed one bug in the cutting recovery mode, when I moved the torch using the arrows and pressed CANCEL MOVE, and then pressed the button to CYCLE RESUME, the program continues to move without probing.

The fix for this has been pushed.

Please Log in to join the conversation.

Time to create page: 0.347 seconds