QT plasmac conversion

5 years 7 months ago #203054 by snowgoer540

Replied by snowgoer540 on topic QT plasmac conversion

in the [TRAJ] and [DISPLAY] section, change DEFAULT_LINEAR_VELOCITY to 3.33

it is in machine units per second. So 200/60 = 3.33

Please Log in to join the conversation.

5 years 7 months ago #203058 by wade956

Replied by wade956 on topic QT plasmac conversion

It's also looking like my THC is not adjusting anymore. I see the lights come on and off but the servo motor is not moving. Any suggestions?

Please Log in to join the conversation.

Time to create page: 0.058 seconds