qtplasmac question

hello all,
couple questions.
so trying to switch to the new qtplasmaC, when start up i get some errors , see attachment. anything to be concern about?
second - do i need to add a axis home button?
third - how does one change the colors in the GUI, not a big fan of the yellow,myself '

thank you,

motal2004 wrote: hello all,
couple questions.
so trying to switch to the new qtplasmaC, when start up i get some errors , see attachment. anything to be concern about?
second - do i need to add a axis home button?
third - how does one change the colors in the GUI, not a big fan of the yellow,myself '

thank you,

Attachment not found

1. Nothing to be concerned about. Standard warnings.

2. I'm not sure I understand your question. Are you asking about A axis, or "an" axis home button?

3. see "GUI SETTINGS" in this section: linuxcnc.org/docs/devel/html/plasma/qtpl...ml#qt_parameters-tab

Lots of good stuff in the manual, definitely worth the read, even though some of it is a bit dry.

Thanks for the info, question Two referring to homing button for all the axis.

Oh will re read the manual again...
Thanks again.

Like this?:

What!!! Man I how did I missed that! When I get home I will double check. It’s the yellow color

What!!! Man I how did I missed that! When I get home I will double check when I get home. It’s the yellow color