Does putting *.txt in the ini file work

Using QTPlasmaC .

Does putting *.txt in the ini file work

[FILTER]
PROGRAM_EXTENSION = .ngc,.nc,.tap GCode File (*.ngc, *.nc, *.tap, *.txt)

It displays the line in the GUI but it does not show the *.txt file in the folder

Clive S wrote: Using QTPlasmaC .

Does putting *.txt in the ini file work

[FILTER]
PROGRAM_EXTENSION = .ngc,.nc,.tap GCode File (*.ngc, *.nc, *.tap, *.txt)

It displays the line in the GUI but it does not show the *.txt file in the folder

It should, you're just half way there.

Try this:

snowgoer540 wrote:

Clive S wrote: Using QTPlasmaC .

Does putting *.txt in the ini file work

[FILTER]
PROGRAM_EXTENSION = .ngc,.nc,.tap GCode File (*.ngc, *.nc, *.tap, *.txt)

It displays the line in the GUI but it does not show the *.txt file in the folder

It should, you're just half way there.

Try this:

Code:

PROGRAM_EXTENSION = .ngc,.nc,.tap,.txt GCode File (*.ngc, *.nc, *.tap, *.txt)

Doing it the way I had it worked in PlasmaC and general other configs. So must be a QT thing

Thanks.