How to move a QTplasmaC config

More
5 years 5 months ago #207561 by Clive S
How to move a QTplasmaC config was created by Clive S
How to move a QTplasmaC working config from a to another PC.

IE. can I just move the config folder over or will there be some sim-link or Python issues ?

Please Log in to join the conversation.

More
5 years 5 months ago #207568 by tommylight
Replied by tommylight on topic How to move a QTplasmaC config
Zip the config folder, save to a USB, copy, unzip, right click on the ini file and choose "open with other application" then type linuxcnc and press enter.

Please Log in to join the conversation.

More
5 years 5 months ago #207569 by Clive S
Replied by Clive S on topic How to move a QTplasmaC config

tommylight wrote: Zip the config folder, save to a USB, copy, unzip, right click on the ini file and choose "open with other application" then type linuxcnc and press enter.


As easy as pie !!

I don't think you could do that with PlasmaC because of all the sim-links

Please Log in to join the conversation.

More
5 years 5 months ago #207572 by tommylight
Replied by tommylight on topic How to move a QTplasmaC config
It did work for PlasmaC also with zipping the folder, at least it worked on several PC's i used.

Please Log in to join the conversation.

Time to create page: 0.070 seconds
Powered by Kunena Forum