Why is Plasmac and QTplasmac pausing at the end of a cut for no reason?

More
5 years 4 months ago #212458 by phillc54
Replied by phillc54 on topic Why is Plasmac and QTplasmac pausing at the end of a cut for no reason?

rodw wrote: Really strange I don't get updates despite bring subscribed to this thread.

Me either, for any thread or even for the PlasmaC section. :(
I am getting tired of checking the forum manually...

Please Log in to join the conversation.

More
5 years 4 months ago #212496 by snowgoer540
Replied by snowgoer540 on topic Why is Plasmac and QTplasmac pausing at the end of a cut for no reason?

phillc54 wrote:

rodw wrote: Really strange I don't get updates despite bring subscribed to this thread.

Me either, for any thread or even for the PlasmaC section. :(
I am getting tired of checking the forum manually...


I stopped getting emails as well... :pinch:

Please Log in to join the conversation.

More
5 years 4 months ago #212654 by phillc54
Replied by phillc54 on topic Why is Plasmac and QTplasmac pausing at the end of a cut for no reason?

rodw wrote: There is still the issues that render QTplasmac unusable. Eg. cycle start issue mentioned earlier. To me thats a worry when the one that works for me is depreciated.


Did you ever sort this out?

Please Log in to join the conversation.

More
5 years 4 months ago #212726 by rodw
Replied by rodw on topic Why is Plasmac and QTplasmac pausing at the end of a cut for no reason?

phillc54 wrote:

rodw wrote: There is still the issues that render QTplasmac unusable. Eg. cycle start issue mentioned earlier. To me thats a worry when the one that works for me is depreciated.


Did you ever sort this out?


No have not looked at it!

Please Log in to join the conversation.

More
5 years 4 months ago #212727 by phillc54
Replied by phillc54 on topic Why is Plasmac and QTplasmac pausing at the end of a cut for no reason?

rodw wrote:

phillc54 wrote:

rodw wrote: There is still the issues that render QTplasmac unusable. Eg. cycle start issue mentioned earlier. To me thats a worry when the one that works for me is depreciated.

Did you ever sort this out?

No have not looked at it!


If you have a pendant and or external buttons then it may be related to some of the hal nets that qtplasmac needs. I have recently pushed some hal pins that allow a pendant to be more easily connected.

linuxcnc.org/docs/devel/html/plasma/qtpl....html#qt_ext-hal-pin

Please Log in to join the conversation.

More
5 years 4 months ago #212791 by rodw
Replied by rodw on topic Why is Plasmac and QTplasmac pausing at the end of a cut for no reason?
Plasmac should not be fighting with the dedicated Mesa MPG inputs surely? That side of it was working.

I did see that. I might review some of the early red/yellow/green/flash code we did. Those pins could be handy.. I have not been using the pendant buttons for motion start but they are probably connected.

Please Log in to join the conversation.

More
5 years 4 months ago #212792 by phillc54
Replied by phillc54 on topic Why is Plasmac and QTplasmac pausing at the end of a cut for no reason?

rodw wrote: Plasmac should not be fighting with the dedicated Mesa MPG inputs surely?

No, it has nothing to do with MPG, I wasn't suggesting that. I was looking more towards is-idle, is-paused etc. I am only guessing because I haven't seen your config.

Please Log in to join the conversation.

More
5 years 3 months ago #215362 by rodw
Replied by rodw on topic Why is Plasmac and QTplasmac pausing at the end of a cut for no reason?

MX-Linux has the preempt kernel in the standard packages so it can be easily installed from synaptic or apt.
 
Any more clues on this? I've installed MX Linux  MX-19.4.1_x64 “ahs”
But can't find anything about preempt_rt in Synaptic
What should I look for?

Please Log in to join the conversation.

More
5 years 3 months ago #215363 by phillc54
Replied by phillc54 on topic Why is Plasmac and QTplasmac pausing at the end of a cut for no reason?
 

Attachment not found

Please Log in to join the conversation.

More
5 years 3 months ago #215366 by rodw
Replied by rodw on topic Why is Plasmac and QTplasmac pausing at the end of a cut for no reason?
Thanks Phil, That worked but the next challenge is installing the key without a user ID
Code:
$ sudo apt-key adv --keyserver hkp://keys.openpgp.org:80 --recv-key EF1B07FEE0EE663E Executing: /tmp/apt-key-gpghome.VIuCqsavWb/gpg.1.sh --keyserver hkp://keys.openpgp.org:80 --recv-key EF1B07FEE0EE663E gpg: key EF1B07FEE0EE663E: new key but contains no user ID - skipped gpg: Total number processed: 1 gpg:           w/o user IDs: 1

This must be new. Any ideas?

Please Log in to join the conversation.

Time to create page: 0.105 seconds
Powered by Kunena Forum