qtplasmac error

More
5 years 3 months ago #214501 by billykid
qtplasmac error was created by billykid
hi, after a long time I have been able to test the plasma works very well with the plasmac interface but I cannot start the qtplasmac version.linuxcnc 2.9 buster just downloaded, sim version starts regularly with the new interface but my converted config doesn't.I am attaching the log file.thanks in advanceMauro

Please Log in to join the conversation.

More
5 years 3 months ago #214503 by phillc54
Replied by phillc54 on topic qtplasmac error
Can you post a compressed file of your complete converted config.
 

Please Log in to join the conversation.

More
5 years 3 months ago #214557 by billykid
Replied by billykid on topic qtplasmac error
here they are

Please Log in to join the conversation.

More
5 years 3 months ago #214672 by phillc54
Replied by phillc54 on topic qtplasmac error
In the [KINS] section of the ini file you have:
Code:
KINEMATICS = trivkins


It should be:
Code:
KINEMATICS = trivkins coordinates=xyz

Edit: I pushed a error test fix for this.

Please Log in to join the conversation.

More
5 years 3 months ago #214696 by billykid
Replied by billykid on topic qtplasmac error
Thanks, I made the change now from this error. I would do the new configuration with pnconf.

Please Log in to join the conversation.

More
5 years 3 months ago #214698 by phillc54
Replied by phillc54 on topic qtplasmac error
That is odd, it loads here perfectly after I made the change...

Please Log in to join the conversation.

More
5 years 3 months ago #214714 by billykid
Replied by billykid on topic qtplasmac error
surely it is a simlink problem .. i will solve it. this cut was made days ago with plasmac, the thc did its job well on an old twisted sheet more than 10 mm thank you !

Please Log in to join the conversation.

More
5 years 3 months ago #214715 by phillc54
Replied by phillc54 on topic qtplasmac error
I hope you do solve it.

Nice butterfly, my wife has one of them on my todo list... 
[img

Please Log in to join the conversation.

More
5 years 3 months ago #214719 by billykid
Replied by billykid on topic qtplasmac error
It works! i deleted and rewrote coordinates = xyz in uppercase. 
[img

Please Log in to join the conversation.

More
5 years 3 months ago #214723 by phillc54
Replied by phillc54 on topic qtplasmac error
Great work. 
[img

 

Please Log in to join the conversation.

Time to create page: 0.091 seconds
Powered by Kunena Forum