qtplasmac error message

After the latest update which changed over to python3, I had an interesting time updating and running qtplasma. I still have this error which doesn't appear to be very important as qtplasmac is running, but it would be nice to get rid of this as well.

2.9.0-pre0-4365-g0e4582b09

Traceback (most recent call last):File "/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py", line 1053, in file_loadedmsg, xMin, yMin, xMax, yMax = self.bounds_check('loaded', 0, 0)File "/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py", line 1543, in bounds_checkif self.gcodeProps == 'in':TypeError: 'NoneType' object is not subscriptable

created a line in conversational, sent if to the main screen, and threw an error..... + shut down

thought I'd add it onto this thread as it may be python3 related.

If you guys start linuxcnc from a terminal does it give any hints in the terminal output about missing modules?

Edit: It may be worth setting the default python to python2 on a system wide basis:
linuxconfig.org/how-to-change-from-defau...sion-on-debian-linux

then running the Qt install script:
linuxcnc.org/docs/devel/html/plasma/qtpl...c.html#qt-dependency

 

robertspark wrote:

2.9.0-pre0-4365-g0e4582b09

Traceback (most recent call last):File "/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py", line 1053, in file_loadedmsg, xMin, yMin, xMax, yMax = self.bounds_check('loaded', 0, 0)File "/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py", line 1543, in bounds_checkif self.gcodeProps == 'in':TypeError: 'NoneType' object is not subscriptable
created a line in conversational, sent if to the main screen, and threw an error..... + shut down

thought I'd add it onto this thread as it may be python3 related.

This issue is fixed.

crowloy wrote:

After the latest update which changed over to python3, I had an interesting time updating and running qtplasma. I still have this error which doesn't appear to be very important as qtplasmac is running, but it would be nice to get rid of this as well.

Code:

hm2/hm2_7i92.0: registered [QTvcp][INFO]  Logging to "/home/colten/git/qtplasma/qtdragon.log" (logger.py:100) run_string(from interpreter import this):  Traceback (most recent call last):   File "<string>", line 1, in <module> ImportError: __import__ not found [QTvcp.QTVCP.QT_PSTAT][INFO]  Using DEFAULT handler file path: /home/colten/git/linuxcnc/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py (qt_pstat.py:97)

 

Could you post the config backup, the mention of qtdragon.log seems a bit odd.

linuxcnc.org/docs/devel/html/plasma/qtplasmac.html#qt_backup

here's the config files. I've been running qtplasmac for quite awhile just updating the git repo and running 

OK, the qtdragon.log was leading me up the wrong path, I see you have that specified in the .ini file.
I set your config up as a sim and could not see the issue.
It would be worth trying it with the "LOG_FILE = qtdragon.log" line commented out.
Failing that it may be worthwhile for you to set the default python on your PC to python3.
linuxconfig.org/how-to-change-from-defau...ion-on-debian-linux/
Then after doing that run the qt install script: You won't need the designer part of the script.

Edit: If you update then you won't need to set the default pyhton version, I have pushed a change to the install script so it is python3 only.