ohm sensor

chuben
Topic Author
Offline
Senior Member

5 years 2 months ago #216899 by chuben

ohm sensor was created by chuben

Hi, I am new to linuxcnc and I have made a plasma cutting table and everything works fine but I am not able to install the ohm probe. For the ohmic probe I am using a thcad-5 and as a main card I am using a 7i76e table. Can someone help me with a tutorial?
Thanks

Please Log in to join the conversation.

snowgoer540
Offline
Platinum Member

5 years 2 months ago #216904 by snowgoer540

Replied by snowgoer540 on topic ohm sensor

Not the answer to your main question, but just by looking at the name of your backup files, I would recommend that you update, you are on v1.0.25 and the latest is v1.0.60 A lot has changed/improved, etc.

In case you'd like to look at the changes: htmlpreview.github.io/?https://github.co...lasmac/versions.html

Please Log in to join the conversation.

chuben
Topic Author
Offline
Senior Member

5 years 2 months ago #216983 by chuben

Replied by chuben on topic ohm sensor

Thanks but I have updated and I am not able to install the ohmic sensor

Please Log in to join the conversation.

Time to create page: 0.100 seconds