QTplasmac jog keyboard keys not working

On making a pncconf config using QTplasmac I have it working apart from the keyboard jog keys.

Where should I start looking for this ?

Edit:  This was using MXmint   2.9

On the parameters tab (or settings tab depending on the screen resolution), ensure "KB Shortcuts" is checked (it is not by default).

snowgoer540 wrote:

On the parameters tab (or settings tab depending on the screen resolution), ensure "KB Shortcuts" is checked (it is not by default).

You are a star Snowy I new I had seen it some ware. Thanks

That one still bites me sometimes :laugh:

snowgoer540 wrote:

That one still bites me sometimes :laugh:

I don't think that was in earlier versions.

One more thing unrelated. Is it possible to bring the ssd to another PC without a mesa card to get it loaded
as you know it fails without the 7i96 connected.

I make several clones with Zonzilla it makes it very fast to setup another machine.

I believe it's been there since the public inception, but it's a "set it and forget it" kind of setting, so it's easy to forget about (hence why it bites me sometimes as well ).  It is recorded in the .pref file though, so if you had a new machine you could place it there manually and it should work from the get-go.

You could do the behind-the-scenes config stuff, but I reckon the 7i96 card needs to be present to load LinuxCNC / GUI.

Yes I agree 

Clive S wrote:

Yes I agree 

What would be a nice text editor for MXlinux ?

Geany.