Spotting Qtplasmac

Here is the Gcode structure for spotting, it would be helpful if you help me see the gFormar.format structure, which is an array that contains the commands.
if (centerPunch) {
            writeComment("CENTER PUNCH THE HOLE ONLY");
            //writeBlock(feedOutput.format(99999));
            writeBlock(mFormat.format(3), $Format.format(2), sFormat.format(1)); //start the torch
            writeBlock(gFormat.format(91));
            writeBlock(gFormat.format(1), xOutput.format(0.00001));
            writeBlock(gFormat.format(90));
            //writeBlock("F#<_hal[plasmac.cut-feed-rate]>");
            //writeBlock(gFormat.format(0));
          }else {
 

Please try it if you can all the possible operations now I'm out of time, I tried some and it seems to work

It may well be that the PP uses a common M5 at the end of every operation. You could change that to M5 $-1 and it will work for all operations.