Little typo in the docs - Pulse hal pin

IN this section, 
linuxcnc.org/docs/devel/html/plasma/qtpl...html#qt_button-pulse

it says

The delay is specified in seconds, if the delay is not specified then it will default to one second.

I found this confusing. I think it should say something like:

The pulse duration is specified in seconds, if the pulse duration is not specified then it will default to one second.

Fixed. Thanks for the report.
 

Thanks.

See. Some people actually reads the docs you and Greg have put so much effort into!

Its really getting to be a kickass system and well worth the effort of upgrading