cut recovery ext pin

More
4 years 9 months ago #232246 by billykid
cut recovery ext pin was created by billykid
hi, i used eight external pins for power, start, stop etc buttons and they work great. I added four for cut recovery but it doesn't boot anymore and returns these errors

Please Log in to join the conversation.

More
4 years 9 months ago #232258 by tommylight
Replied by tommylight on topic cut recovery ext pin
Seems there is a refference to "oScale" somewhere but the pin does not exist.

Please Log in to join the conversation.

More
4 years 9 months ago #232274 by billykid
Replied by billykid on topic cut recovery ext pin
Yes Tom. look forward to Phill  :-)  I would not like it to be a locale  problem this time too.

Please Log in to join the conversation.

More
4 years 9 months ago #232315 by snowgoer540
Replied by snowgoer540 on topic cut recovery ext pin
I believe I see at least part of the problem. 

But, can you post a backup of your config.  Or at least the file where you connected these pins?

Please Log in to join the conversation.

More
4 years 9 months ago #232319 by billykid
Replied by billykid on topic cut recovery ext pin
here is the backup. the current custom_postgui file has 8 buttons and everything works, the "2custom_postgui.hal" file is the one with cutrec and does not go

Please Log in to join the conversation.

More
4 years 9 months ago #232372 by phillc54
Replied by phillc54 on topic cut recovery ext pin
Thanks for the report, a fix has been pushed.
 

Please Log in to join the conversation.

More
4 years 9 months ago #232412 by billykid
Replied by billykid on topic cut recovery ext pin
Well now it starts!
but for the manual x y movements before cutting they don't work?
I haven't tried yet because the pins on the 7i37 are almost finished  :-(

Please Log in to join the conversation.

More
4 years 9 months ago #232414 by phillc54
Replied by phillc54 on topic cut recovery ext pin
It jogs fine here, from both the GUI buttons and the keyboard.
The fix for external cut recovery pins has no effect on jogging at all.

Please Log in to join the conversation.

More
4 years 9 months ago #232416 by billykid
Replied by billykid on topic cut recovery ext pin
it all works. i just wanted to say if there was a way to move x and y without keyboard and mouse.
however better as cutrecovery than normal jog
Thank you!

Please Log in to join the conversation.

More
4 years 9 months ago #232417 by phillc54
Replied by phillc54 on topic cut recovery ext pin
If you want to jog X/Y without the GUI buttons or a keyboard then you need a pendant or similar connected to the appropriate halui jog pins.

linuxcnc.org/docs/devel/html/man/man1/halui.1.html
 

Please Log in to join the conversation.

Time to create page: 0.082 seconds
Powered by Kunena Forum