Qtvcp

More
4 years 8 months ago #235897 by aabtech
Qtvcp was created by aabtech
This is a bug in Linux 2.9 QtPlasmaC plasma float switch
see the image below.

Please Log in to join the conversation.

More
4 years 8 months ago #235898 by phillc54
Replied by phillc54 on topic Qtvcp
Can you describe what you were doing when the error happened.
What version is your QtPlasmaC?

Please Log in to join the conversation.

More
4 years 8 months ago #235922 by Backerman
Replied by Backerman on topic Qtvcp
I have the same problem with version 1.221.165 with rip and debian built on machine!
Linux MX21 (Debian 11) The Error comes when you press the float switch and break away!

 

Attachment not found

 

Attachment not found

 

Attachment not found

Please Log in to join the conversation.

More
4 years 8 months ago #235970 by phillc54
Replied by phillc54 on topic Qtvcp
I have not been able to replicate this issue. Could you post a backup of your config from the BACKUP CONFIG button on the PARAMETERS tab (or SETTINGS tab if using a 4x3 GUI).

Please Log in to join the conversation.

More
4 years 8 months ago #235996 by tommylight
Replied by tommylight on topic Qtvcp
The other topic with the same subject and content deleted.
No double posting, please, makes a mess for people who are trying to help.

Please Log in to join the conversation.

More
4 years 8 months ago #236026 by Backerman
Replied by Backerman on topic Qtvcp
Here are the parameters! Converted by plasmac
 

Attachment not found

Please Log in to join the conversation.

More
4 years 7 months ago #236074 by snowgoer540
Replied by snowgoer540 on topic Qtvcp
I was able to replicate this using your config files and push a fix.  

Version 1.221.166 should solve your issue, you will have to wait for the buildbot to do its thing though.  :)

Please Log in to join the conversation.

More
4 years 7 months ago #236214 by aabtech
Replied by aabtech on topic Qtvcp
It was the float switch when you press it
Give you error message but it has been
Solved by the new update version.
Thank you very much.

Please Log in to join the conversation.

Time to create page: 0.119 seconds
Powered by Kunena Forum