Update qtplasmac to latest with system from buildbot

More
4 years 4 months ago #246059 by CFE
Replied by CFE on topic Update qtplasmac to latest with system from buildbot
Thanks Phil, and how do I install that ? Not a Linux wizard myself

Please Log in to join the conversation.

More
4 years 4 months ago #246060 by phillc54
Replied by phillc54 on topic Update qtplasmac to latest with system from buildbot
I didn't know that python3-gst was a requirement but it seems it was added to qtvcp several days ago... a year ago.

Code:
sudo apt install python3-gst-1.0

Please Log in to join the conversation.

More
4 years 4 months ago #246061 by CFE
Replied by CFE on topic Update qtplasmac to latest with system from buildbot
I have installed all the above discussed, but to no avail. Still a dead machine. Now what to do ?

Please Log in to join the conversation.

More
4 years 4 months ago #246062 by phillc54
Replied by phillc54 on topic Update qtplasmac to latest with system from buildbot
Can you post the errors from trying to run LinuxCNC from a terminal.
 

Please Log in to join the conversation.

More
4 years 4 months ago #246114 by CFE
Replied by CFE on topic Update qtplasmac to latest with system from buildbot
Hi Phil,

I am out of the workshop this morning, but will have a crack this afternoon. What is the command to start QtPlasmaC from the terminal ? (I have never started it from the terminal.)

Cheers,

Please Log in to join the conversation.

More
4 years 4 months ago #246121 by phillc54
Replied by phillc54 on topic Update qtplasmac to latest with system from buildbot
It should be along these lines.
Code:
linuxcnc ~/linuxcnc/configs/<machine_name>/<machine_name>.ini

 

Please Log in to join the conversation.

More
4 years 4 months ago #246126 by CFE
Replied by CFE on topic Update qtplasmac to latest with system from buildbot
Hi Phil,

I have started linuxcnc from a terminal with "linuxcnc /home/plasma/linuxcnc/configs/Plasma/Plasma.ini" and have attached the error files. No idea what to do with this. I suspect it has something to do with python ?

Cheers, Peter

Please Log in to join the conversation.

More
4 years 4 months ago #246127 by CFE
Replied by CFE on topic Update qtplasmac to latest with system from buildbot
Further to the above, I see the following file "/usr/share/qtvcp/panels/loadusr/loadusr.ui" is not present on the computer, which doesn't help I suppose. What to do ?

Cheers, Peter

Please Log in to join the conversation.

More
4 years 4 months ago #246128 by phillc54
Replied by phillc54 on topic Update qtplasmac to latest with system from buildbot
That is a some kind of user panel, I have no idea why it is trying to load that...

Can you post the .ini file and ALL the .hal files

Please Log in to join the conversation.

More
4 years 4 months ago #246129 by CFE
Replied by CFE on topic Update qtplasmac to latest with system from buildbot
Hi Phil,

I have attached the requested files.

Cheers, Peter

Please Log in to join the conversation.

Time to create page: 0.059 seconds
Powered by Kunena Forum