gcode not found

  Hi all, I tried my machine today and I get the error gcode not found.  I get this error using conversational or uploading a file from sheetcam.
Everything else appears to be working. 
  Traceback (most recent call last):File "/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py", line 2501, in <lambda>self.w.main_tab_widget.currentChanged.connect(lambda w:self.main_tab_changed(w))File "/usr/share/qtvcp/screens/qtplasmac_4x3/qtplasmac_4x3_handler.py", line 2026, in main_tab_changedself.CONV.conv_setup(self, self.w)File "/usr/lib/python3/dist-packages/qtvcp/lib/qtplasmac/conversational.py", line 76, in conv_setupCOPY(P.filteredBkp, P.fNgc)File "/usr/lib/python3.7/shutil.py", line 245, in copycopyfile(src, dst, follow_symlinks=follow_symlinks)File "/usr/lib/python3.7/shutil.py", line 120, in copyfilewith open(src, 'rb') as fsrc:FileNotFoundError: [Errno 2] No such file or directory: '/tmp/qtplasmac/filtered_bkp.ngc'
 

It looks like a recent update did not go to plan.

In the .ini file for the [FILTER] section it should read:


Do you have a package installation or run in place?
 
EDIT: Could you try restarting LinuxCNC to see if that fixes it.

EDIT2: See next post.

Sorry that I broke the package build.

 A fix has been posted and will be available when the Buildbot is finished.

Users who have updated their package installation prior to this fix will probably need to start LinuxCNC twice after upgrading again to apply this fix.

Well, after three attempts I finally got it working, sorry about the mess...

It will be available when this build completes.

buildbot.linuxcnc.org/buildbot/builders/....checkin/builds/8907

Awesome, thanks!