Materialverter missing

More
3 years 4 days ago #283878 by RobKin
Materialverter missing was created by RobKin
I can’t find materialverter script in my linuxcnc install. Can someone send it to me?  I tried the terminal method from the manual and it just says its missing too. 

Please Log in to join the conversation.

More
3 years 4 days ago #283879 by phillc54
Replied by phillc54 on topic Materialverter missing
For a package install of 2.8 it should be here:
Code:
/usr/share/doc/linuxcnc/examples/sample-configs/by_machine/plasmac/materialverter.py

Please Log in to join the conversation.

More
2 years 10 months ago #288788 by RobKin
Replied by RobKin on topic Materialverter missing
There is no plasmac folder there in my linux.
I tried updating all my packages and still not there. Do I have to start completely over if I want to get this back?

Please Log in to join the conversation.

More
2 years 10 months ago #288791 by phillc54
Replied by phillc54 on topic Materialverter missing
What version of LinuxCNC are you using?
 

Please Log in to join the conversation.

More
2 years 10 months ago #288798 by RobKin
Replied by RobKin on topic Materialverter missing
V2.10-001.011

Please Log in to join the conversation.

More
2 years 10 months ago #288799 by phillc54
Replied by phillc54 on topic Materialverter missing
Then it will be qtplasmac-materials

linuxcnc.org/docs/devel/html/plasma/qtpl...#_material_converter
 

Please Log in to join the conversation.

Time to create page: 0.081 seconds
Powered by Kunena Forum