choosing a resistor for THCAD-10

More
2 years 11 months ago #284652 by aabtech
choosing a resistor for THCAD-10 was created by aabtech
If you put a 2.4MΩ resistor in each leg it would give you 49:1
 and 1MΩ in each leg giving a 21:1 ratio.
i want to know how many resistor watts do you need.

Please Log in to join the conversation.

More
2 years 11 months ago #284679 by tommylight
Replied by tommylight on topic choosing a resistor for THCAD-10
2 of 1 Mohm resistors should do just fine, one on each leg. 2W type just to be safe.

Please Log in to join the conversation.

Time to create page: 0.063 seconds
Powered by Kunena Forum