Button erstellt und er soll auch schalten Button created and he should also swit

More
2 years 11 months ago #285607 by phillc54
Replied by phillc54 on topic Button erstellt und er soll auch schalten Button created and he should also swit
Does the value of cut amps in the parameters page change when you use the + and - buttons in the main page?

Please Log in to join the conversation.

More
2 years 11 months ago #285609 by Plasmanfm
Replied by Plasmanfm on topic Button erstellt und er soll auch schalten Button created and he should also swit
No
In the hall-show cut_amps_2 value  and  cut_amp-f  50 and kan set wiht + or -

Please Log in to join the conversation.

More
2 years 11 months ago #285611 by phillc54
Replied by phillc54 on topic Button erstellt und er soll auch schalten Button created and he should also swit
I don’t know why, it definitely works here. 
I will have another look tomorrow. 

Please Log in to join the conversation.

More
2 years 11 months ago #285612 by Plasmanfm
Replied by Plasmanfm on topic Button erstellt und er soll auch schalten Button created and he should also swit
Hallo phillc 54

No Problem.

King regarde and thank´s
Juergen

Please Log in to join the conversation.

More
2 years 11 months ago #285639 by Plasmanfm
Replied by Plasmanfm on topic Button erstellt und er soll auch schalten Button created and he should also swit
Hallo phillc 54
What I noticed in the Hall show is there is a pin qtplasmac cut_amps_2-2
it is a pin with not Value


king regarde and thank´s
Juergen

Please Log in to join the conversation.

More
2 years 11 months ago #285669 by phillc54
Replied by phillc54 on topic Button erstellt und er soll auch schalten Button created and he should also swit
I don't see that pin at all and it does seems to work here. Attached is zip of the only three files that I tested with:

 

Attachment not found


 

Please Log in to join the conversation.

More
2 years 11 months ago #285716 by Plasmanfm
Replied by Plasmanfm on topic Button erstellt und er soll auch schalten Button created and he should also swit
Hallo phillc54
OK, we now have the values ​​on the Pwmgn adjustable with + and -
the value is missing from the display
please refer Attachments

king regarde and thank's

Juergen

Please Log in to join the conversation.

More
2 years 11 months ago #285724 by Plasmanfm
Replied by Plasmanfm on topic Button erstellt und er soll auch schalten Button created and he should also swit
Hallo plillc54
the pin qtplasmac cut_amps_2-2 is the Display
when I'm on the Hall show pin qtplasmac cut_amps_2-2 
"set" the value I have the value in the display
the value for the pin qtplasmac cut_amps_2-2 would have to be passed

king regarde and thank's
Juergen

 

Please Log in to join the conversation.

More
2 years 11 months ago #285728 by phillc54
Replied by phillc54 on topic Button erstellt und er soll auch schalten Button created and he should also swit
There is no pin named cut_amps_2-2, there is a pin named cut_amps_2 and it is connected in the custom_postgui.hal file that was in my last post.
Code:
net qtplasmac:cut_amps qtplasmac.cut_amps-f => qtplasmac.cut_amps_2 hm2_7i96s.0.pwmgen.00.value
 

Please Log in to join the conversation.

More
2 years 11 months ago #285730 by Plasmanfm
Replied by Plasmanfm on topic Button erstellt und er soll auch schalten Button created and he should also swit
Hallo plillc54
it looks like it's working now

I have in the custom_postgui.hal that insert : net qtplasmac:cut_amps qtplasmac.cut_amps-f => qtplasmac.cut_amps_2-2
Yesterday I had a suspicion that it was the display...
0 value in display 0
OK, I'll do a few tests now

king regarde and thank´s
Juergen

Please Log in to join the conversation.

Time to create page: 0.984 seconds
Powered by Kunena Forum