E-Stop

Hallo phillc54
Wenn man den Extern E-Stop zb an hm2_7i96s.0.inm.00.input-06 setzt..
geht es wie es soll was mir nur stört das wenn der externe E-Stop Resetet wird der E-Stop Button " Grün " ist kann man das ändern ?
Das es so ist wie beim mormalen Start E-Stop Button drücken und dann Power ein jetzt ist es so : externe E-Stop Resetet E-Stop Button ist gedrückt
Power Button kann direkt gedrückt werden !

 f you set the external E-Stop to hm2_7i96s.0.inm.00.input-06, for example.
Is it working as it should, the only thing that bothers me is that when the external E-Stop is reset, the E-Stop button is “green”, can you change that?
It's like the normal start, press the E-Stop button and then power on. Now it's like this: external E-Stop reset E-Stop button is f you set the external E-Stop to hm2_7i96s.0.inm.00.input-06, for example.
Is it working as it should, the only thing that bothers me is that when the external E-Stop is reset, the E-Stop button is f you set the external E-Stop to hm2_7i96s.0.inm.00.input-06, for example.
Is it working as it should, the only thing that bothers me is that when the external E-Stop is reset, the E-Stop button is pressed “green”, can you change that?
It's like the normal start, press the E-Stop button and then power on. Now it's like this: external E-Stop reset E-Stop button is pressed
Power button can be pressed directly!“green”, can you change that?
It's like the normal start, press the E-Stop button and then power on. Now it's like this: external E-Stop reset E-Stop button is pressed
Power button can be pressed directly!
Power button can be pressed directly!

my thank´s
and king regarde

Juergen

What E-Stop mode do you have configured, it will be in your .prefs file as:
Could you also post a copy of your latest custom python code.
 

Hallo phillc54
I set the E-Stop via the LinuxCNC Pncconf.Wizard
and in plasma-juergen.hal:
net estop-out <= iocontrol.0.user-enable-out
net estop-out => iocontrol.0.emc-enable-in


Attachments the qtplasmac_custom.py
my thank´s
and king regard 
Juergen

Plasmanfm wrote:

Hallo phillc54
I set the E-Stop via the LinuxCNC Pncconf.Wizard

I need to know which e-stop mode it is.

Hallo phillc54

The button is set via the Linuxcnc Pncconf Wizard

King regarde
and thank’s
Juergen

Yes but I need to know what type of estop button. 

 

Hallo phillc54

The button is set via the Linuxcnc Pncconf Wizardsee
see attachment

King regarde
and thank’s
Juergen

OK, so the GUI ESTOP is a button.

I am confused, I must be missing something in the translation.
I do not see any green on the ESTOP or POWER buttons, do you have a qtplasmac_custom.qss file?
 

Hallo phillc54The color is changed
Everything is as normalwith the difference of colorsPower on is greenPower off is red
Start Program Press the E-Stop Button goes green
you can switch the program in on by using the power button" E-Stop green Power Button green the Programm runing "
If you press the E-Stop E-Stop and Power Button goes red !
The logic is that something is on, it is green, something is off, it is red E-Stop presses red E-Stop reset green

step 1,2,3  Everything is correct without an external E-Stop.
With e-stop installed with e-stop 2,3,4
The internal e-stop is always green when the external e-stop is not pressed
that's not ok it should be red and after pressing it should turn green
If the external e-stop presses, it the internal e-stop red, that's ok
after reset is the internal e-stop green !
but I want be internal e-stop red and after pressing internal e-stop then only green !!
King regarde and
thank’s
Juergen
 

Can you do a BACKUP from the SETTINGS tab and post that file here so that I can duplicate your config here.