Best QTplasmac version to use

HI guys, been away from this for a while but need to build a control box for another user.
Whats the best  way to keep up to date today for a non tech savvy user?
1. Sebs Buildbot and master  buildbot2.highlab.com/
2. 2.92 ISO on downloads  linuxcnc.org/downloads/
3. Andy's Debian Script in the 2.9 Getting LInuxcnc docs? 
linuxcnc.org/docs/stable/html/getting-st...th_preempt_rt_kernel

Thanks in advance I spent years running on master but the last year or so itts been purely BBookworm 2.9.x for me,
 

I use both on a daily basis. (2.10 wasn't working with 4th axis post from sheetcam when I tried it)
Both 2.10 master and 2.9.2 are stable and work well.


But....if it's for someone else use 2.9.2 just to be safe. Easier for them to restore if the PC gets destroyed

Hi Rod
I have all my users on 2.9.2 (some going to 2.9.3 soon). I use the buidlbot2.highlab.com as repository and I run on MX Linux (just because it is nice to work with)

mariusl wrote:

Hi Rod
I have all my users on 2.9.2 (some going to 2.9.3 soon). I use the buidlbot2.highlab.com as repository and I run on MX Linux (just because it is nice to work with)

Thanks Marius. I'm going with 2.9.3 on an i3 All in one PC with a realtek 8111 NIC. With a few tricks I documented here, it is solid
docs.google.com/document/d/1jeV_4VKzVmOI...diY/edit?usp=sharing