qtplasmac (Operation Error: hm2/hm2_7i76e.0:) in middle of cut

More
2 years 2 months ago #307688 by RMJ fabrication
Replied by RMJ fabrication on topic qtplasmac (Operation Error: hm2/hm2_7i76e.0:) in middle of cut
 

Attachment not found

Please Log in to join the conversation.

More
2 years 2 months ago #307692 by PCW
Replied by PCW on topic qtplasmac (Operation Error: hm2/hm2_7i76e.0:) in middle of cut
OK so ethtool is not installed

sudo apt-get install ethtool

 

Please Log in to join the conversation.

More
2 years 2 months ago #307721 by RMJ fabrication
Replied by RMJ fabrication on topic qtplasmac (Operation Error: hm2/hm2_7i76e.0:) in middle of cut
 

Attachment not found

Please Log in to join the conversation.

More
2 years 2 months ago #307723 by tommylight
Replied by tommylight on topic qtplasmac (Operation Error: hm2/hm2_7i76e.0:) in middle of cut
On your screenshot, it clearly states to do
sudo apt-get update
and try again
Although, this being a networking issue, i have to ask:
-how is the PC wired to internet?
-If wired through cable, did you revert back the network settings?

Please Log in to join the conversation.

More
2 years 2 months ago #307725 by PCW
Replied by PCW on topic qtplasmac (Operation Error: hm2/hm2_7i76e.0:) in middle of cut
Yes, looks like you have no network connectivity.

What does

ip a

report

Please Log in to join the conversation.

More
2 years 2 months ago #307727 by RMJ fabrication
Replied by RMJ fabrication on topic qtplasmac (Operation Error: hm2/hm2_7i76e.0:) in middle of cut
My computer is not connected to the internet and has no wifi should I connect to the internet and try again? I used a cable to do the installation and then I disconnected it to connect the 7i76e.

Please Log in to join the conversation.

More
2 years 2 months ago #307732 by RMJ fabrication
Replied by RMJ fabrication on topic qtplasmac (Operation Error: hm2/hm2_7i76e.0:) in middle of cut
ip a
 

Attachment not found

Please Log in to join the conversation.

More
2 years 2 months ago #307734 by tommylight
Replied by tommylight on topic qtplasmac (Operation Error: hm2/hm2_7i76e.0:) in middle of cut
Find a USB-wireless dongle and connect to internet.

Please Log in to join the conversation.

More
2 years 2 months ago #307735 by PCW
Replied by PCW on topic qtplasmac (Operation Error: hm2/hm2_7i76e.0:) in middle of cut
This brings up the question is why in the world is ethtool not included in the
LinuxCNC distribution (plus the RT8168 DKMS driver should be as well)

These affect all LinuxCNC Ethernet connected motion devices, not just Mesa

Please Log in to join the conversation.

More
2 years 2 months ago #307737 by tommylight
Replied by tommylight on topic qtplasmac (Operation Error: hm2/hm2_7i76e.0:) in middle of cut
Just checked, not included in Mint 22.

Please Log in to join the conversation.

Time to create page: 0.059 seconds
Powered by Kunena Forum