Qtplasmac SIM Estop Label

Since I create the G-Code at home ....

Characters with Freecad ...Sheetcam

I check the result with qtplasmac_I_metric

Then drive with me to my hall and cut as far as possible, very good but what notice is this EStop label!

No matter what Estop setting I take the label I always have whether 0, 1 or 2!

Can you change that?

King regard

Juergen
 

If you want to change the function then you would need to make the appropriate HAL connections as well.
 

Ok..
what do change in the hal and where is the hal in the sim


King regarde
Juergen