Zero Pierce delay After pierce Only

grijalvap wrote:

yes it works if you use 2 tools one with piercing delay and one with 0 delay.
I'm using the tool from sheetcam (tempoary tool created from file). so i need 2 files or edit the file after pierce and reload.
what I'm thinking is just press a button and make the Pircing delay 0,

In the Sheetcam processor, there are some variables at the top of the file to select between Sheetcam and qtplasmac tools. Sorry about that but had to humor Les at Sheetcam seeing its distributed with his software (and he wrote the post.)!

There is also a script that lets you import a Sheetcam  toolset into qtplasmac

Last I checked this still worked, let me know if you encounter any issues:

linuxcnc.org/docs/devel/html/plasma/qtpl...#_material_converter

I understend what you mean but I want to keep the temporary tools because they are in the GCODE file, the operator don't has to select.
I wonder if we can have something like this
 
 

grijalvap wrote:

I understend what you mean but I want to keep the temporary tools because they are in the GCODE file, the operator don't has to select.
 

If you set the cut parameters up correctly (eg replicating sheetcam toolsets in qtplasmac by importing the Sheetcam tools), the user still won't need to select anything. Instead, Sheetcam will pass the tool number to QTplasmac in the gcode and it will retrieve the corrrect settings. Keep sheetcam the master of toolsets and update QTplasmac if you change settings.
 

I was not awere of this working mode, it can be useful because you can use  sheetcam drawings or generate in QTplasmaC.
but still need change pierce delay in tool.