QTPlasmac pierce delay handling

kworm
Topic Author
Offline
Senior Member

1 year 4 months ago #330451 by kworm

Replied by kworm on topic QTPlasmac pierce delay handling

I tried a resistor and no luck with the contact. I'll give Tommy's reed relay a try. Does it matter where it is in the lead and should it need a resistor?

Please Log in to join the conversation.

snowgoer540
Offline
Platinum Member

1 year 4 months ago #330452 by snowgoer540

Replied by snowgoer540 on topic QTPlasmac pierce delay handling

There’s a diagram in the previously provided link. No resistor for the reed switch.

Please Log in to join the conversation.

kworm
Topic Author
Offline
Senior Member

1 year 4 months ago #330534 by kworm

Replied by kworm on topic QTPlasmac pierce delay handling

The reed switch works great. Thanks for everyones help.

Please Log in to join the conversation.

tommylight
Online
Administrator

1 year 4 months ago #330538 by tommylight

Replied by tommylight on topic QTPlasmac pierce delay handling

Please Log in to join the conversation.

Time to create page: 0.041 seconds