Post for Vectric W/ATC

Hi,

Has anyone got a post processor for Vetric Asipe with Auto Tool Change in it?

Thanks in advance

I use this one with Vcarve6.0, and Aspire5.0

Works for me but might need some tweaks for you.

FariaAl,

Thank you so very much, this will get me started.

Here's a PP for Vetric Asipe in inches if anyone wants or needs one.

Thanks for all the help.

I had a chance to actually run this PP today (instead of just check it for tool changes).
I had the feed protocols all crossed up, here's a fresh PP with the feeds working.