ArtcamPro 2011 - which post processor to use

More
4 years 11 months ago #225262 by SSIRon
ArtcamPro 2011 - which post processor to use was created by SSIRon
I am using artcam pro ver 2011 with mach3 but converting to linux cnc.  does anyone have any experiance with artcam /linuscnc and any suggests as to which which post processor should be used.

Please Log in to join the conversation.

More
4 years 11 months ago #226765 by aleksamc
Replied by aleksamc on topic ArtcamPro 2011 - which post processor to use
mach3 postprocessor is enough in default questions.
But I edited this postprocessor for my needs. For example I turn on G64 P<precision>.

Please Log in to join the conversation.

More
4 years 11 months ago #226770 by SSIRon
Replied by SSIRon on topic ArtcamPro 2011 - which post processor to use
OH - cant tell you how pleased i was to see this. Thank you so much.

Please Log in to join the conversation.

More
4 years 11 months ago #226966 by aleksamc
Replied by aleksamc on topic ArtcamPro 2011 - which post processor to use
Look in installation folder of artcam/postp

Please Log in to join the conversation.

Time to create page: 0.073 seconds
Powered by Kunena Forum