Postprocessor Fusion 360

Witam mam problem z PostProcesorem W fusion 360 po Aktualizacji (wczesniej działa wszystko) na Linux CNC gdy wybieram linuxa z listy wyskakuje BŁĄD i nie mogę wygenerować G-kodu. 
Posiadam ploter frezujący samoróbkę nie wiem co to może być ktoś ktoś jaki pomysł ???

Google translate:
Hello, I have a problem with the PostProcessor In fusion 360 after the Update (everything works earlier) on Linux CNC when I choose Linux from the list ERROR pops up and I cannot generate G-code.
I have a self-milling plotter, I do not know what it can be, someone who has an idea

Fusion 360 has 3 different post processors for Linuxcnc. After the update I had to go back and download one again and seems to work fine.

Make sure you have an updated post from here:
cam.autodesk.com/hsmposts

Can change the post used this way:

 

Nadal to samo wyskakuje taki komunikat jak na zdjęciu.    

Try posting the code without operation Adaptive2 and any other operation that use that same tool. Looks like you have some had settings for that tool offset and numbering. See if the code works without it.