Another GUI project underway

Lcvette wrote: not sure, but currently the only size is 1080x1920.. not sur ewhat it would look like on a higher res screen, but you could try it out and see?

I will indeed set up a computer and test the GUI tomorrow. I wasn't aware that it is already included with QtPyVCP.

I have tried editing the probe_basic.ui file on my linuxpc, changed a few dimensions, saved the file but when I ran the probe_basic UI again, there were no changes.
I am trying to do some changes on this UI, I wanna make it fit on a 15 inch wide touch screen that's 1376 * 768 or smth like this.
I know I will have to re'arrange the components but first I would like to see the changes.
Please advice!

vmihalca wrote: I have tried editing the probe_basic.ui file on my linuxpc, changed a few dimensions, saved the file but when I ran the probe_basic UI again, there were no changes.
I am trying to do some changes on this UI, I wanna make it fit on a 15 inch wide touch screen that's 1376 * 768 or smth like this.
I know I will have to re'arrange the components but first I would like to see the changes.
Please advice!

You can try to set the main window max size. But you also need to check the minimum size as well as it could be bigger than your new max size

Hi,
is there a way like in Gmocappy to select a drawing and have the corresponding gcode selection? :huh:
Thanks

gantarone wrote: Hi,
is there a way like in Gmocappy to select a drawing and have the corresponding gcode selection? :huh:
Thanks

can you be more specific? Probe Basic has an in window gcode editor when you select the file on the file page. it has some nice built in features such as find/replace, save as etc..

Is the editor a current widget or an external feature?

when you select in view your work Gmoccapy auto select the gcode , that is very useful!!!
see image below

ah i see, no i don't think that is currently setup, qtpyvcp is using VTK for the backplot graphics, i am sure it can be setup to do the same but as of right now it is not.

Gremlin has a callback function for that. It is connected to the sourceview widget.

Norbert

newbynobi wrote: Gremlin has a callback function for that. It is connected to the sourceview widget.

Norbert

nice! not sure if VTK has that. we need some helpers for VTK as currently Turboss is the only one working in it and he would be very happy to have some help. if you know of anyone who may be able to assist that would be fantastic! :side:


Chris