Couple questions about QTPYVCP

Glad that got it working again!

KCJ

I added some buttons to save load and reload tools in the tool table, but its not saving the pocket number. it sets it to -1

I noticed you don't have a P (pocket) column set in the tool table, that would explain why it is not being set. I guess for machines without a ATC P can always be the same as T, so maybe I should make P default to T unless specified otherwise...

KCJ

KCJ wrote: I noticed you don't have a P (pocket) column set in the tool table, that would explain why it is not being set. I guess for machines without a ATC P can always be the same as T, so maybe I should make P default to T unless specified otherwise...

KCJ

I thought that too so I pasted a table with p values and added back the p column. If I hit the save button it still overwrites it.

I fixed it.

The yml file didn't have it in there from when I added the snippet of code for moving the columns

Yes, that text is specified in your YAML config file. To remove it delete the file_header_template option in the tooltable kwargs section.

You should also probably set the tooltable columns back to TPXYZR, and then use the tooltable widget's displayColumns property in designer to customize the visible columns and their order.

KCJ

KCJ wrote: Yes, that text is specified in your YAML config file. To remove it delete the file_header_template option in the tooltable kwargs section.

You should also probably set the tooltable columns back to TPXYZR, and then use the tooltable widget's displayColumns property in designer to customize the visible columns and their order.

KCJ

Sounds good, thanks

How do you reset the spindle override?

Spindle.override.reset didn't work when I tried it

I just testing `spindle.override.reset` and it seems to be working properly.

KCJ

KCJ wrote: I just testing `spindle.override.reset` and it seems to be working properly.

KCJ

Ok I'll double check