QtPyVCP Mill Touch V6

It will be very good. And is it possible to correct it so that the cutter rises on a pause? Thanks for attention.

Using your example program.run:#<qLineEditName> results in the following:

Not sure where the second argument is coming from.

using print(program_start_line) prints >> #<line_number> Obviously not what one would expect. I would expect the value from the line edit to be returned.


Traceback (most recent call last):
File "/home/don/.local/lib/python2.7/site-packages/qtpyvcp/actions/__init__.py", line 96, in <lambda>
widget.clicked.connect(lambda: method(*args, **kwargs))
File "/home/don/.local/lib/python2.7/site-packages/qtpyvcp/actions/program_actions.py", line 84, in run
CMD.auto(linuxcnc.AUTO_RUN, program_start_line)
TypeError: function takes exactly 1 argument (2 given)

hottabich wrote: It will be very good. And is it possible to correct it so that the cutter rises on a pause? Thanks for attention.

That's not possible AFAIK because every situation is different.

JT

Donb9261 wrote: Using your example program.run:#<qLineEditName> results in the following:

Not sure where the second argument is coming from.

using print(program_start_line) prints >> #<line_number> Obviously not what one would expect. I would expect the value from the line edit to be returned.


Traceback (most recent call last):
File "/home/don/.local/lib/python2.7/site-packages/qtpyvcp/actions/__init__.py", line 96, in <lambda>
widget.clicked.connect(lambda: method(*args, **kwargs))
File "/home/don/.local/lib/python2.7/site-packages/qtpyvcp/actions/program_actions.py", line 84, in run
CMD.auto(linuxcnc.AUTO_RUN, program_start_line)
TypeError: function takes exactly 1 argument (2 given)

That is a syntax example... you need to use the name of a qlinedeit.

JT

Lol. I did. That would have been the rookiest of all rookie mistakes.

I have my action set to: program.run:#<lineNumber>

My qlineedit is named lineNumber

prints #<LineNumber> No actual value from the entry sent just the text

I think there is an issue with Qt 5.9.5 and using #<somewidget> as it is just passing the string and not grabbing the value from the widget. Thinking about it though it seems to only be actions and works fine with MCODES. Not sure. But I posted a work around.

Thanks John.

Just tested probe_basic M6 function. Set T 1 and press M6. It works. So, I am at a loss. It seems to send the T#<main_tool_number> M6 fine. Else the UI would error on the T call.

I will test some of the others to see if it is just program.run:line that is effected and walk it back from there.

How to unlock spindle speed adjustment during program execution?