qtpyvcp error vtk version Stretch

More
6 years 11 months ago #150795 by Gnevko
Replied by Gnevko on topic qtpyvcp error vtk version Stretch
if I understood the installation process correctly, the following steps are needed:

1) git clone github.com/kcjengr/qtpyvcp qtpyvcp

2) cd qtpyvcp

3) pip install --editable .

4) cd

5) cp ~/qtpyvcp/scripts/.xsessionrc ~/

You are speaking about step 5 - "cp ~/qtpyvcp/scripts/.xsessionrc ~/" but my problem is I can't finish successfully the step 3.

Please Log in to join the conversation.

More
6 years 11 months ago #150798 by Gnevko
Replied by Gnevko on topic qtpyvcp error vtk version Stretch
I tryed to remove vtk package from setup.py file and it works for installation but after that of course probe basic doesn't work
Code:
File "/home/cnc/qtpyvcp/qtpyvcp/widgets/display_widgets/__init__.py", line 1, in <module> from vtk_backplot.vtk_backplot import VTKBackPlot File "/home/cnc/qtpyvcp/qtpyvcp/widgets/display_widgets/vtk_backplot/__init__.py", line 1, in <module> from vtk_backplot import VTKBackPlot File "/home/cnc/qtpyvcp/qtpyvcp/widgets/display_widgets/vtk_backplot/vtk_backplot.py", line 7, in <module> import vtk ImportError: No module named vtk

Please Log in to join the conversation.

More
6 years 11 months ago #150807 by Leon82
Replied by Leon82 on topic qtpyvcp error vtk version Stretch
At one point I lost my widgets, I'm not sure if it will help you but I don't think it will hurt anything.

forum.linuxcnc.org/41-guis/36224-my-qtpyvcp-vcp?start=10#139775

Please Log in to join the conversation.

More
6 years 11 months ago #150917 by Gnevko
Replied by Gnevko on topic qtpyvcp error vtk version Stretch
I am an idiot :)

I installed 32 Bit Debian 9, but

vtk can't be installed from pip on 686 machines


github.com/kcjengr/qtpyvcp/issues/26#issuecomment-556957571

Please Log in to join the conversation.

Time to create page: 0.039 seconds
Powered by Kunena Forum