Probe_Basic Metric

Gnevko
Topic Author
Offline
Senior Member

6 years 11 months ago #151458 by Gnevko

Probe_Basic Metric was created by Gnevko

Hi,

maybe I do something wrong, but I get values displayed only in inches

Attachment not found

Z should be ca 200 mm, but ...

Attachment not found

What is interesting, the configuration works correct with AXIS.

Please Log in to join the conversation.

Gnevko
Topic Author
Offline
Senior Member

6 years 11 months ago #151460 by Gnevko

Replied by Gnevko on topic Probe_Basic Metric

This solved the problem:

[RS274NGC]
PARAMETER_FILE = linuxcnc.var
RS274NGC_STARTUP_CODE = F10 S300 G21 G17 G40 G49 G54 G64 P0.001 G80 G90 G91.1 G92.1 G94 G97 G98
SUBROUTINE_PATH = subroutines/

Please Log in to join the conversation.

Time to create page: 0.145 seconds