Code:
# ToDo : This may not be needed, as it could be recieved from linuxcnc.stat
def maxVelocity(self):
# max velocity settings: more then one place to check
# This is the maximum velocity of the machine
temp = self.ini.find('TRAJ', 'MAX_LINEAR_VELOCITY') or self.ini.find('TRAJ', 'MAX_VELOCITY')
if temp == None:
log.warning("No entry [TRAJ] MAX_VELOCITY found in INI, using 15ipm")
temp = 15.0
return float(temp) * 60
Looks like that is okay too. I duplicated the instructions and created a new set in the same vcp and it works following exactly what I stated. Hmmm...
You may try using my ini file. and hal file. Something is not connected. My code is fully portable for all qtpyvcp versions. And 2.7~2.9 LCNC. Since you already have code base for the number keys (i assume worked) in your mainwindow.py file I assume somehow Qt versions are incorrect and your not getting the correct qml. I am running 5.9.5.
You may try setting your debug level to
[EMC]
MACHINE = vcp2
DEBUG = 0x7FFFFFFF
VERSION = 1.1
The start linuxcnc via the command line to do a trace on any errors being presented via LCNC through the terminal window. That debug level outputs everything so it can be a pain to find.
Once started get your machine )sim) ready. The press each button 1 at atime. Check the terminal for errors. Last entry should be the latest call or error.
Also, check the terminal you did editvcp yourvcpname
If there is a Qt error it will show there.
You will have to unzip it.