QtPyVCP - Single Block - halui.program.step {SOLVED}

# ------------------------------------------------------------------------- # BEGIN RUN/STEP FROM HERE SETUP # ------------------------------------------------------------------------- ### If Single Block is active(Checked) then the program will start from ### the line specified in the lineNumber VCPLineEdit in STEP mode. ### NOTE *****The cycle start button works is used for STEP ### WARNING *****If NOT STEP run_from_here WILL EXECUTE Program when pressed only ### RECOMMENDED *****Never executing full run inside a py program call. ### ELSE it will set the run_from_here normal and wait for operator ### to press the button in the UI def setStartingLineLabel(self): sb = self.singleBlock.isChecked() if sb: print('Single Block Value: ' + str(sb)) # Set variable to the VCPLineEdit Text Value line_number = self.lineNumber.text() # Set StatusLabel to alert where the program will start self.run_from_here.setText('RUN FROM LINE ' + line_number) # Set the actionName property of the Run From Line Btn self.run_from_here.setProperty('actionName', 'program.run:' + line_number) # Update the run_from_here checked status to notify when ready self.run_from_here.setChecked(True) # OPTIONAL - Play a sound to alert when ready playsound('/home/don/Downloads/bvmtnf_ui-21.wav') # Cause the click event for the 'run_from_here' btn self.run_from_here.click() # Set Feed Hold pause() # Clear Out the VCPLineEdit for lineNumber self.lineNumber.setText('') else: # Set variable to the VCPLineEdit Text Value line_number = self.lineNumber.text() # Set StatusLabel to alert where the program will start self.run_from_here.setText('RUN FROM LINE ' + line_number) # Set the actionName property of the Run From Line Btn self.run_from_here.setProperty('actionName', 'program.run:' + line_number) # Update the run_from_here checked status to notify when ready self.run_from_here.setChecked(True) # OPTIONAL - Play a sound to alert when ready playsound('/home/don/Downloads/bvmtnf_ui-21.wav') # Clear Out the VCPLineEdit for lineNumber self.lineNumber.setText('') def clearStartLineLabel(self): # Clear out text set by prior call self.run_from_here.setText('RUN FROM LINE') # UnCHeck the btn self.run_from_here.setChecked(False) # ------------------------------------------------------------------------- # END RUN/STEP FROM HERE SETUP # -------------------------------------------------------------------------

# ------------------------------------------------------------------------- # BEGIN CYCLE START FUNCTION # ------------------------------------------------------------------------- ### Works for normal run actions outside run from here def CycleStart(self): # Check Single Block Status sb = self.singleBlock.isChecked() if sb: # Start program in STEP step() else: # Start program in full run mode run() # ------------------------------------------------------------------------- # END CYCLE START FUNCTION # -------------------------------------------------------------------------

### Setup connection to VCPLineEdit self.lineNumber.returnPressed.connect(self.setStartingLineLabel) ### Connect run_from_here Btn to clear label after start self.run_from_here.clicked.connect(self.clearStartLineLabel)