Rule: "status:all_axes_homed" show Type error

Wei
Topic Author
Offline
New Member

6 years 7 months ago #162232 by Wei

Rule: "status:all_axes_homed" show Type error was created by Wei

OS: Linux Mint 19.2 Tina
Linuxcnc 2.8 + QtpyVCP +QTVCP

As the pic showed below,I picked status:all_axes_homed from the list in channel box, Type show 'error' in red,,It should be 'bool'.

Attachment not found

Please Log in to join the conversation.

KCJ
Offline
Platinum Member

6 years 6 months ago #162391 by KCJ

Replied by KCJ on topic Rule: "status:all_axes_homed" show Type error

Thanks for the bug report!

I have fixed it so the all_axis_homed value is properly initialized to False.
The fix is in master and will be included in the next release.

Please Log in to join the conversation.

Time to create page: 0.090 seconds