[Error] - Requested Tool Not Found

>However as soon as i hit "save tool table" all the pockets are set to -1 and eventually the tool database gets cleared and overwritten again.

hello, this looks like a bug



edit:

>When i copy over the too table from the sim everything including touching off tools works

this looks like the problem
can you upload the sim tooltable
thanks

The tool number -1 has norhing to do with QtPyVCP or metric/imperial, it is most probably caused by power off of the PC and the resulting corruption in the files. That was my case.
Loop the tool change, change a tool, then revert back, that fixed it for me.

Make sure you have a custom_config.yml with column definitions in your machine dir, e.g.:

After this the table gets stored with pocket values and qtpyvcp works fine.