qtpyvcp stored parameters

anfänger
Topic Author
Offline
Platinum Member

6 years 1 month ago #182012 by anfänger

qtpyvcp stored parameters was created by anfänger

Hi,,

maybe this is stupid question again, but where can I din a list of stored parameters qtpyvcp ist using?
The reason is simple I want to know what tool was in the spindle before shutdown.
qtpyvcp ist restoring the the tool after homing. But I would like to know the tool number before homing.
And I think qtpyvcp is doing this with a parameter.

I have a m-code restoring the tools in atc after startup and I want to know if one of the tools is in the tool changer.
The reason for this is, I need to cool the bearings if my tool changer and want to set the signal while powering up.
I can manage already when changing tools, but not on startup.

Thanks Patrick

Please Log in to join the conversation.

TurBoss
Offline
Premium Member

6 years 1 month ago #182017 by TurBoss

Replied by TurBoss on topic qtpyvcp stored parameters

persistent data is stored with the "data_manager" plugin

read: github.com/kcjengr/qtpyvcp/blob/master/q...s/tool_table.py#L156
write: github.com/kcjengr/qtpyvcp/blob/master/q...s/tool_table.py#L205

kudos go to @KCJ

Please Log in to join the conversation.

anfänger
Topic Author
Offline
Platinum Member

6 years 1 month ago #182053 by anfänger

Replied by anfänger on topic qtpyvcp stored parameters

Thanks,
can I access the „data_manager“ from M-Code?
Or otherwise fill the widget from python?
At the moment I am filling my atc widget this way:

Code:

#1 = 0
o130 while [#1 LT 12]
    #1 = [#1+1]
    #2 = #[5189+#1]
    (DEBUG, EVAL[vcp.getWidget{"dynatc"}.store_tool{#1, #2}])
o130 endwhile

And I want something like this (it‘s happening before homing, so qtpyvcp did not set the tool in spindle yet):

Code:

#1 = 0
o130 while [#1 LT 12]
    #1 = [#1+1]
    #2 = #[5189+#1]
    o135 if [#<tool_in_spindle]> eq #2] 
               M135 P1
    o135 endif
    (DEBUG, EVAL[vcp.getWidget{"dynatc"}.store_tool{#1, #2}])
o130 endwhile

As an alternative to M135 I can manipulate a hal button

Please Log in to join the conversation.

Time to create page: 0.464 seconds