MonoKrom - QtPyVCP GUI for PlasmaC and Mill

Just got some time ang gave PlasmaC run panel a look.
I left the powermax comms.

Done, will use MONOKROM for all typography.
Package names and commands will stay lowercase, of course

KCJ wrote: Done, will use MONOKROM for all typography.
Package names and commands will stay lowercase, of course

thankyou Kurt,

Should I make other panels too?

Yes, keep on crunching!
So far everything you have done looks great and is realistic to implement.

You'll probably get ahead of me, but that's ok, I will catch up eventually

Sorry I'm not able to download this and see for myself before I ask.. Do the buttons have a different color when pressed? Im just thinking about mashing a touchscreen with fat fingers, it might be nice for the + and - buttons to flash the control green and red respectively when pressing the "kerf width" control for example.

If you press and hold + or - will the number cycle up or down as long as you hold or does it only increment once per tap? I assume that holding wouldn't be practical for some controls. What's the increment value? Will the increment value be end user adjustable in a config?

Finally, will there be room for me to add my own buttons somewhere? At least a couple on the main screen?

Are the cut parameters all HAL pins?

It was quite challenging to fit all config settings in one screen.
But I managed to do that.
Nothing removed:)

AgentWD40 wrote: Sorry I'm not able to download this and see for myself before I ask.. Do the buttons have a different color when pressed?

No

AgentWD40 wrote: Im just thinking about mashing a touchscreen with fat fingers, it might be nice for the + and - buttons to flash the control green and red respectively when pressing the "kerf width" control for example.

changing colors wont do any good because that will be under your fingertip and you wont be able to see that.
And trust me I got pretty big hand and fat fingers, there wont be any problem. Moreover, you can get 24inch touchscreen for cheap, and you will be happy for that.

AgentWD40 wrote:
If you press and hold + or - will the number cycle up or down as long as you hold or does it only increment once per tap? I assume that holding wouldn't be practical for some controls. What's the increment value? Will the increment value be end user adjustable in a config?

Only Kurt can answer that

AgentWD40 wrote: Finally, will there be room for me to add my own buttons somewhere? At least a couple on the main screen?

what custom buttons you want?

we can also use this style to increase touch area

pinder wrote: Just a little request.
Make monokrom in capitals
MONOKROM
cheers
Pinder

To late, i tend to disagree on this as all caps is considered screaming on the internet.
But it has already been decided so i will shut up now !