How to add picture graphic image to gui qtpyvcp

I want to add some help picture to gui linuxcnc in pyqtvcp.
I add it to recources file. Inside resources file I have
I tried 2 methods with Label:
1) In QSS stylesheet: 2) Rigth bottom press on label > Change rich text > chouse picture

Both ways picture adds to QT Designer and it seen. But When I run linuxcnc, place where picture should be is blank.
What I do wrong? I see other configurations has picture and they are even can rotate (for example tool change), but I'm stuck on so basic problem:side:

It's realy nobody knows what problem is?
I saw a lot of QtPyVCP guis and they had graphic, I don't know what I'm doing wrong.

aleksamc wrote: It's realy nobody knows what problem is?
I saw a lot of QtPyVCP guis and they had graphic, I don't know what I'm doing wrong.

adding graphics requires the graphics to be in a directory specified for images with the correct path, you also need to add the image file path to the .qrc file, then you need to compile.

Unfortunatly doesn't work:
I wrote in terminal:

qcompile stonecnc
Compiling .ui files in package 'stonecnc':
mainwindow.ui => mainwindow_ui.py ... ok

Compiling .qrc files in package 'stonecnc':
resources.qrc => resources_rc.py ... ok

My file qrc


But when I run linuxcnc I don't see any picture. Could be problem with Language settings?

aleksamc wrote: Unfortunatly doesn't work:
I wrote in terminal:

qcompile stonecnc
Compiling .ui files in package 'stonecnc':
mainwindow.ui => mainwindow_ui.py ... ok

Compiling .qrc files in package 'stonecnc':
resources.qrc => resources_rc.py ... ok

My file qrc

Attachment not found

Attachment not found

But when I run linuxcnc I don't see any picture. Could be problem with Language settings?

hmmm, not sure it should be working, how are you inserting the image into the ui?

I use QLabel, then I change it's QSS an there I add image: url(":/images/help_stone.png".
I explained it in the 1-st topic.

you need to place the label where you want it, then select it and in the property editor under QLabel/test/pixmap there is a drop down manu, select "choose resource" then in the new window that opens click on images, then select your image and click OK should be there, then you shouod run . qcompile and check your ui it should be there!

I think you will not believe me, but I did everything as you said. And I see image in qtdevelopper, and compilling finished witout errors. But linuxcnc still opens with blank image.

I just tested and it is working, im not sure why yours is not? what version of qtpyvcp do you have installed?

In Qt Designer is evrything fine, I see picture well.
But in Linuxcnc it's blank.
So linuxcnc is 2.8.1 version
and QtDesigner version is 5.11.3 as same as Qt.
All plugins are run except libpyqt5_py3.so

Could you add here some of yours picture that I could try to add and to see if problem is not in file?