Probe Basic / Jog Increment Hal Pins

More
4 years 10 months ago #228209 by Jedi
Probe Basic / Jog Increment Hal Pins was created by Jedi
Hallo every one,

im using Probe Basic and it is working great. 
Im trying to connect the Jog incremental of the UI with hardware buttons is ther a Hal Pin like in the gmoccapy Gui?

thanks in advands!

Best Regards,
Benedikt

Please Log in to join the conversation.

More
4 years 10 months ago #228734 by andypugh
Replied by andypugh on topic Probe Basic / Jog Increment Hal Pins
If you start LinuxCNC then open a terminal and type
Code:
halcmd show pin *jog*
Then you will get a list of likely pins.
You can then try searching the LinuxCNC docs for each pin to find the description.

Please Log in to join the conversation.

Time to create page: 0.213 seconds
Powered by Kunena Forum