Probe Basic Lathe on LinuxCNC 2.9

More
2 years 11 months ago #286003 by geostein8888
Replied by geostein8888 on topic Probe Basic Lathe on LinuxCNC 2.9
i did this already yesterday, but still the same error

Georg

Please Log in to join the conversation.

More
2 years 11 months ago #286036 by der hobbyist
Replied by der hobbyist on topic Probe Basic Lathe on LinuxCNC 2.9
I have a similar issue. I installed the debian12-iso from the linuxcnc download page today. But if I start the Probe basic lathe I get the same error.
I think there is a problem with the probe_basic_lathe.yml  (see the picture below).

Please Log in to join the conversation.

More
2 years 11 months ago #286041 by geostein8888
Replied by geostein8888 on topic Probe Basic Lathe on LinuxCNC 2.9
looks like a probkem with a tab or so, where toolchange: is defined
unfortunately i do not have access to this pc at the moment to checkt it by myself

Please Log in to join the conversation.

More
2 years 11 months ago #286043 by geostein8888
Replied by geostein8888 on topic Probe Basic Lathe on LinuxCNC 2.9
not a tab, there is something completly wrong in the yaml file

src/probe_basic_lathe/probe_basic_lathe.yml whats curretly the last in git

at line 172 around it should look like this:
Code:
programmable-coolant.spindle-to-nozzle-dist:     description: horizontal distance from spindle centerline to nozzle centerline.     default_value: 0.0     persistent: true     min_value: -1000     max_value: 1000
but currently it looks like
Code:
programmable-coolant.spindle-to-nozzle-dist:     description: horizontal distance from spindle   toolchange:     provider: qtpyvcp.widgets.dialogs.toolchange_dialog:ToolChangeDialog     kwargs:       ui_file: {{ file.dir }}/toolchange_dialog_pb.ui     persistent: true     min_value: -10000     max_value: 10000
a bug came in on Nov. 16th here

Please Log in to join the conversation.

More
2 years 11 months ago #286044 by Lcvette
Replied by Lcvette on topic Probe Basic Lathe on LinuxCNC 2.9
whoa, ok, fixing

Please Log in to join the conversation.

More
2 years 11 months ago #286046 by Lcvette
Replied by Lcvette on topic Probe Basic Lathe on LinuxCNC 2.9
Edit... found it.. missed this was in the lathe yaml..  fixed and pushed, give it a few minutes to rebuild the debs in the repository and publish
 

Please Log in to join the conversation.

More
2 years 11 months ago #286089 by der hobbyist
Replied by der hobbyist on topic Probe Basic Lathe on LinuxCNC 2.9
Thanks
Now it works

Please Log in to join the conversation.

Time to create page: 0.065 seconds
Powered by Kunena Forum