ATC reference

3 years 10 months ago #259506 by COlger81

ATC reference was created by COlger81

How do i tell the ATC that it is referenced automatically upon startup of Probe Basic? I do not need referencing of the turret.

Chris

Please Log in to join the conversation.

3 years 10 months ago #259578 by Lcvette

Replied by Lcvette on topic ATC reference

is this you?

Please Log in to join the conversation.

3 years 10 months ago #259589 by COlger81

Replied by COlger81 on topic ATC reference

No, his should be identical setup though. Same ATC logic. I have a Fadal 3016L with 21 tool.

Please Log in to join the conversation.

3 years 10 months ago #259605 by Lcvette

Replied by Lcvette on topic ATC reference

I manually reference, but I wonder if you add M13 in the start up line in the initial if it would auto reference at startup.

Please Log in to join the conversation.

Time to create page: 0.092 seconds