Rotary Jog low

If you installed using the dev version you can resolve very quickly. In terminal run:

editvcp probe_basic

When designer opens, look at the dro display box, there are 2 arrows in the top right corner, click until your desired dro axis count is displayed. Then, save. If will now devalue to that drop page on start up.

oh ok still a problem of probe_basic not from my site.

Link Angular Jog and Spindle Speed Display Source don´t saving too.

It's future use as well, I outlined the limited functionality in the main post.

If you prefer them not be linked, you can sever the connection in qtdesigner very simply, it is in signals and slots, just select the connection and hit the red minus sign. Then the jog sliders will work entirely independent at all times.

editvcp probe_basic dont work....

but with the installer i selected developer install.. hmm.

tomorrow i will try the updater.sh

did you get it sorted out?  if not, can you send any errors that you saw during install and or when trying to run editvcp!

Hi, today i got editvcp to run.So i have changed the value from 0 to 1 for the 4 axis display and deselect encoder for spindle rpm and selected the other one.i changed at 4 axis display all a (for A Axis) to b (B Axis) to got a xyzb display....so will it work? Or i have to do more changes?Here are my
changes: 








By the way... i've tryed to update linuxcnc-uspace from 2.10 pre0 to the latest pre... but got this error... 


 

im not sure why you were changing all of that? to display the 4 axis dro page all you needed to do was click the stacked widget tab arrow to display the 4 axis dro page and then save the ui from the file drop down menu, it will then default to the 4 axis display. no need to change anything else. i would go back and undo those changes and follow the instruction above.

as for the update, you should be running 2.9 not 2.10, 2.9 is pretty close to be a lockdown version, 2.10 is not. it will have issues going forward most likely that will require compatibility bug fixes that you will not be able to access.

Hello thanks i will see how i can down to 2.9.

The standart dro is xyza. But i need xyzb.

I've made backup from the original ui so i can change back.

ah, ok.. sorry thought you were adding in new dro's..lol yeah thats fine!