User Install for Probe Basic Py3 (For Machine Control)

More
3 years 7 months ago #267618 by Lcvette

I did the installation yesterday according to the instructions. Since I use a Debian with the German language settings a minor error occurred. In my Linux the directory "home/user/Pictures" does not exist. Therefore I got an error at the end of the installation. This was no problem for me, I just created the directory and installed it again. Then everything worked as desired. I just wanted to mention it here.
Thanks for the detailed help here and also to all who contribute to this forum.
can you tell me what version of the .deb you were installing?  i just went back and looked and the latest does not use the pictures folder but the icons directory:

```
Code:
# Create the icons directory if it doesn't exist sudo -u ${SUDO_USER:-$USER} mkdir -p "${TARGET_HOME}.local/usr/share/icons" # Copy the probe_basic icons directory to the target directory sudo -u ${SUDO_USER:-$USER} cp -r /usr/share/icons/probe_basic_icon.png "${TARGET_HOME}.local/usr/share/icons/" sudo -u ${SUDO_USER:-$USER} cp -r /usr/share/icons/probe_basic_icon_lathe.png "${TARGET_HOME}.local/usr/share/icons/"

Thanks,

Chris

Please Log in to join the conversation.

More
3 years 6 months ago #268526 by buzzFab
@rodw
Is your linked guide still the best way of doing the whole ethercat / probe basic install? I see that now instead of using Lcvettes qtpyvcp-bookworm-installer on git hub they are recommending using python3-probe-basic_0.5.3_all .deb

Please Log in to join the conversation.

More
3 years 6 months ago #268553 by jordanm
Thanks for all this info. I was able to install Debian 12 and probe basic in a short amount of time because of all your work!

I did run into one issue when trying to install Linuxcnc where it was prompting me to insert the install media and it wouldn't complete the installation.
I was able to fix the issue by commenting out the top 2 lines of: /etc/apt/sources.list
Which were:     
    deb cdrom:[Debian GNU/Linux bookworm-DI-alpha2 _Bookworm_ - Official Alpha amd64 DVD Binary-1 
    with firmware 20230218-23:57]/ bookworm main non-free-firmware

With those commented out and the file saved, I retried the linuxcnc install command and everything worked past that point.

Thanks again for all the help!

 

Please Log in to join the conversation.

More
3 years 6 months ago #268556 by rodw
Yes if this is what you are refferring to  docs.google.com/document/d/1jeV_4VKzVmOI...diY/edit?usp=sharing

If you have problems with it looking on a CD, you may have used the wrong ISO. the netinstall I referr to in the link above does not have this problem.

Please Log in to join the conversation.

More
3 years 6 months ago #268626 by jordanm
I guess I didn't see your google doc when I ran my install. I used the google doc from Lcvette, but what you have in your instructions makes sense as well.

Thanks again.

Please Log in to join the conversation.

More
3 years 6 months ago #269173 by scotth
I have the sim running on 2.9.0 and python 3.11 on Mint 21.1
Sim looks like everything is working. No luck so far with a working hal or ini file for my 7i76 to test system. Anyone have these to look at, so I can edit my working axis hal and ini files.

Please Log in to join the conversation.

More
3 years 6 months ago #269174 by Lcvette
There's a guide below this thread in the sticky section for converting a py3 config from working axis config.

Please Log in to join the conversation.

More
3 years 6 months ago #269185 by scotth
I have it running now. I'll see what I have broken soon. Don't see how I would have ever got it running without your help on this. Thank you.

Please Log in to join the conversation.

More
3 years 6 months ago #269187 by Lcvette
Happy to be of help! If you hit a snag just post up your configs and a detailed explanation of the issue.

Chris

Please Log in to join the conversation.

More
3 years 6 months ago #270196 by tommylight
There are 4 pinned topic regarding installation of Probe Basic ( please change the name, pleaseeeeee ), so what should we point the new users towards?

Please Log in to join the conversation.

Time to create page: 0.777 seconds
Powered by Kunena Forum