grid distance in probe basic screen

More
2 years 11 months ago #286541 by der hobbyist
grid distance in probe basic screen was created by der hobbyist
Hi,
How can I set the grid distance in probe basic screen?
I assume that I have to modify the custom_config yaml, but where can I find a documentation, what I can set?
Many thanks in advance

Please Log in to join the conversation.

More
2 years 10 months ago #287630 by andypugh
Replied by andypugh on topic grid distance in probe basic screen
probe_basic is not part of LinuxCNC, and is documented on the author's website.
kcjengr.github.io/probe_basic/

Please Log in to join the conversation.

Time to create page: 0.064 seconds
Powered by Kunena Forum