#probe_tool_number, where to set this?

More
2 years 10 months ago #288141 by merongi
#probe_tool_number, where to set this? was created by merongi
When I add my probe tool as tool #1 and try to probe, ProbeBasic says #<probe_tool_number> not in spindle, aborting.
It seems if I set my probe tool as #0, it goes ok so I guess it's default set as '0'.
Where I can set this tool as, say 99?


 

Please Log in to join the conversation.

More
2 years 10 months ago #288146 by CNC_ANDI
Replied by CNC_ANDI on topic #probe_tool_number, where to set this?
You need to create a tool 99 in the tooltable... save and reload tool table...
Than go to probe menue and insert tool 99 in probe tool.

Please Log in to join the conversation.

More
2 years 10 months ago #288147 by merongi
Replied by merongi on topic #probe_tool_number, where to set this?
Thanks! You remind me to look the PROBING panel again.
I was stupid.
"PROBING" tab has PROBE TOOL # field and I can put "99" there.

Please Log in to join the conversation.

More
2 years 10 months ago #288167 by CNC_ANDI
Replied by CNC_ANDI on topic #probe_tool_number, where to set this?
no problem you are welcome

Please Log in to join the conversation.

Time to create page: 0.080 seconds
Powered by Kunena Forum